Step 4 - Drill the centre point using a suitable size drill bit allowing for the top stem of the glass to seat neatly. Next, measure, mark and cut to the drilled hole with just enough room for the glass stem to fit through. Now drill a hole beside the original hole, creating an l shape to stop the glasses from falling out.
Step 5 - Using a rasp or file, smooth out the jigsaw marks and tidy up the drilled joins first before sanding.
Step 6 - With the wine-glass holder now complete, sand smooth with the coarser 80g sandpaper, rounding over the outer edges and finishing with 150g sandpaper. Now remove any dust with a damp cloth, making it ready for your preference of paint or stain.
Materials
• 300x25mm untreated timber
• Sandpaper
• 80g & 150grit sandpaper
• Linseed oil or stain or paint
Tools
• Tape measure or ruler
• Square
• Pencil
• Jigsaw
• Drill or screw gun
• Protective gear
• Drill bit to suit the stem of glass
• Rasp and file set
• Sander
• Bucket